![](https://www.3dmix.nl/wp-content/uploads/2021/05/iu.jpeg)
Mimaki 3DGD-1800
- Life-sized figures printed in one piece
- Maximum printing size W1450×D1110×H1800mm
- Make a supersized objects with print & build
![Mimaki 3DGD-1800](https://www.3dmix.nl/wp-content/uploads/2021/03/Mimaki-3DGD-1800-transparant.png)
ELECTRICAL CABINET Control room including: • PC • I/O controller • Circuit breaker • Motion driver • Electrical Supply
TOUCH PANEL DISPLAY Operate the printer using the touch panel
GEL CABINET Gel supply pump + control box Vacuum generator
EMERGENCY STOP SWITCH Press switch to stop all printer operations
DOUBLE DOOR ON FRONT AND BACK Main functions: Easily access printed objects Easy access to the print head and table Automatic locking while printing
COORDINATION SYSTEM • Print head moves on the XY axis • Table moves on the vertical Z axis
CLEANING STATION Maintains printing performance Short cleaning time Automatic cleaning during printing
PRINT HEADS • 2 heads that operate independently • Includes UV-LED for curing gel • Dispenser nozzle with interchangeable sizes
VACUUM TABLE • Printing on substrate stabilized with the vacuum table • Range of movement 1800mm • Lower the table for easy access to the printing mechanisms
Toepassingen
Prototypes, architectuurmodellen, modelbouw, pretparkinrichting, 3D-kunst, 3D-signalering, accessoires en meer.
Eigenschappen
Workflow
![](https://www.3dmix.nl/wp-content/uploads/2021/03/Woman-Standing-infront-of-3DGD_839x660.jpg)
Gel Dispensing Printing
GDP technologie
Gel Dispensing Printing
Printen met de Mimaki 3DGD-1800 wordt mogelijk gemaakt door de Gel Dispensing Printing technologie.
- De Gel wordt uitgehard doormiddel van een UV LED lamp
- Extrudeert gel vanuit de spuitmond welke uitgehard laag na laag vormt
- Printen is mogelijk zonder support
- Geen supportmateriaal om te verwijderen
- Verbeterde productiviteit en verminderd verbruiksmateriaal
3D Data Repareerfunctie
![](https://www.3dmix.nl/wp-content/uploads/2021/05/CleanShot-2021-05-12-at-10.35.53.jpg)
![](https://www.3dmix.nl/wp-content/uploads/2021/05/CleanShot-2021-05-12-at-10.35.59.jpg)
Software
3D Data Repareerfunctie
Repareer automatisch de gaten in uw 3D data met de 3DGD Slicer
15 things you didn't know
about the new Mimaki 3DGD-1800
Installatiebenodigdheden
Installed
W3000 mm x D2200 mm x H2800 mm / 2500 kg
Packed
W3400 mm x D2300 mm x H2550 mm / 3000 kg
Minimum Installation Space
W6600 mm x D6200 mm
![](https://www.3dmix.nl/wp-content/uploads/2021/05/CleanShot-2021-05-12-at-10.34.57.jpg)
![](https://www.3dmix.nl/wp-content/uploads/2021/05/CleanShot-2021-05-12-at-10.35.12.jpg)
Specificaties
3D Printing Technology
Gel Dispensing Printing / Dual Print
Maximum Model Size / Weight
W1450 x D1110 x H1800 mm / 150 kg
Printing Speed
Vertical: 350 mm/hr
Modeling Mode (Resolution)
Normal (1.3mm) / Quality (1.0 mm) / High Resolution (0.8 mm)
Modeling Material
MG-100W (UV Curable Resin: White)
Print Heads
2
Nozzle Diameter
1.8 / 2.6 mm (interchangeable)
Power Supply
32A (Three-phase); 380~400VAC +/- 10%; 50/60Hz
Power Consumption while printing
Typical 10kW; Maximum less than 22kW
Air Pressure
600~800 kPa
Ventilation equipment
Ventilation volume 30 m3/h
Operating Environment
16~30ºC, 30~70%Rh
Interface
Network: 10/100BASE-T, Internet protocol, LAN
Install dimensions (WxDxH) / Weight
3000 x 2200 x 2800 mm / 2500 kg
Packed dimensions (WxDxH) / Weight
3400 x 2300 x 2550 mm / 3000 kg
Input Data
STL, OBJ, 3DS, PLY, BLEND, GCODE (3DGD-1800 original)
Slicer Software
3DGD Slicer
Software Operation Specifications
OS: Windows 10 x64; CPU: Intel i7 or greater; Memory: 16GB or more; Graphics Card: NVIDIA 2GB or greater; USB Port: Dongle & Licence
Basic Software Functions
Scale, rotate, split, error correction, support generation, slicing